background image

Operation

Warranty

Introduction

16

17

 Safety and Trademark

Acknowledgement

Customer Assistance

Safety

Nothing 

Comes Close to a Cobra

®

Safety Information for microTALK

®

 Radios 

Your wireless handheld portable transceiver contains a low power 

transmitter. When the talk button is pushed, it sends out radio frequency 

(RF) signals. The device is authorized to operate at a duty factor not to 

exceed 50%. In August 1996, the Federal Communications Commission 

(FCC) adopted RF exposure guidelines with safety levels for handheld 

wireless devices.

Important:

FCC RF Exposure Requirements: For body-worn operation, this radio has 

been tested and meets the FCC RF exposure guidelines when used with 

Cobra accessories supplied or designated for this product. Use of other 

accessories may not ensure compliance with FCC RF exposure guidelines. 

Use only the supplied antenna. Unauthorized antennas, modifications, 

or attachments could damage the transmitter and may violate FCC 

regulations.

Normal Position:

Hold the transmitter approximately five cm (two inches) from your face and 

speak in a normal voice, with the antenna pointed up and away.

Trademark Acknowledgement 

Cobra

®

, microTALK

®

, Nothing Comes Close to a Cobra

®

, VibrAlert

®

  

and the snake design are registered trademarks of Cobra Electronics 

Corporation, USA. Cobra Electronics Corporation™ is a trademark  

of Cobra Electronics Corporation, USA.

The Cobra line of quality products includes 

CB Radios  •  microTALK

®

 Radios  •  Radar/Laser Detectors  •   

Safety Alert

®

 Traffic Warning Systems  •  HighGear

®

 Accessories  •  

CobraMarine

®

 VHF Radios  • Power Inverters  •  Trucker Nav Systems  • 

LED Lights  •  Jumpstarters  •  Accessories

This device complies with part 15 of the FCC Rules. Operation is subject  

to the following two conditions: 1) This device may not cause harmful 

interference, and 2) this device must accept any interference received, 

including interference that may cause undesired operation.
FCC Warnings: Replacement or substitution of transistors, regular diodes or 

other parts of a unique nature, with parts other than those recommended by 

Cobra may cause a violation of the technical regulations of part 95 of the FCC 

rules, or violation of type acceptance requirements of part 2 of the rules.

Product Service 

For any questions about operating or installing this new Cobra product, or if 
parts are missing…

PLEASE CALL COBRA FIRST…

do not return this 

product to the store. See customer assistance on page A1.

For Products Purchased in Canada

If your product should require factory service, please call AVS Technologies Inc. 
at 514-683-1771 ext. 2-264 before sending your radio. For out of warranty 
service, ship this product prepaid to: AVS Technologies Inc.  
(A Division of SYNNEX Canada Limited), 3300 Côte-Vertu, Ste 310 Ville  
St-Laurent, Québec, CANADA H4R 2B7, www.cobra.ca. We reserve the right 
to repair or replace the radio with an equivalent product. Please include the 
following information: Date of Purchase, Model Number, Dealer Purchased From, 
Dealer Address, Dealer Phone Number.

For Products Purchased in the U.S.A.

If your product should require factory service, please call Cobra first before 
sending your radio. This will ensure the fastest turn-around time on your repair. 
You may be asked to send your radio to the Cobra factory. It will be necessary to 
furnish the following to have the product serviced and returned.
1)  For warranty repair include some form or proof-of purchase, such as a 

mechanical reproduction or carbon of a sales receipt.  
If you send the original receipt, it cannot be returned. 

2) Send the entire product. 
3)  Enclose a description of what is happening with the radio. Include a typed or 

clearly printed name and address of where the radio is to be returned. 

4)  Pack radio securely to prevent damage in transit. If possible, use the original 

packing material. 

5)  Ship prepaid and insured by way of a traceable carrier such as United Parcel 

Service (UPS) or Priority Mail to avoid loss in transit to Cobra Factory Service, 
Cobra Electronics Corporation, 6500 West Cortland Street, Chicago, Illinois 
60707 U.S.A. 

6)  If the radio is in warranty, upon receipt of your radio, it will either be repaired 

or exchanged depending on the model. 

Please allow approximately three to four weeks before contacting Cobra for 
status. If the radio is out of warranty, a letter will automatically be sent informing 
you of the repair charge or replacement charge. If you have any questions, 
please call 773-889-3087 for assistance.

For Products Purchased Outside Canada or the U.S.A.

Please contact your local dealer for product service information.

English

CXT345C_MANL_ENG.indd   16-17

2/19/13   11:24 AM

Summary of Contents for microTALK CXT345C












Reviews: