background image

Operation

Warranty

Introduction

14

15

General Specifications 

 

  FRS/GMRS Frequency  

Allocation and Compatibility

Important: 

Please note that Cobra GMRS models with 15 Channels  

may designate different channel numbers for the same frequency.  
For example, a Cobra 15 Channel GMRS model would need to be  
tuned to Channel 11 in order to communicate with a 22 Channel  
GMRS tuned to Channel 15. Please refer to the chart below for  
channel/ frequency number compatibility. 

A =  Channel No. for 22 Channel FRS/GMRS Models

B =  Channel No. for 15 Channel GMRS Models

C = Type of Radio Service

D = Frequency in MHz

E = Power Output

 

E

 

1  

1  

FRS/GMRS  

462.5625 

High 

  2  

FRS/GMRS 

462.5875 

High

  3  

FRS/GMRS  

462.6125 

High  

  4  

4  

FRS/GMRS  

462.6375 

High  

  5  

5  

FRS/GMRS  

462.6625 

High  

  6  

6  

FRS/GMRS  

462.6875 

High   

  7  

7  

FRS/GMRS  

462.7125 

High 

  8    FRS  

467.5625 

Low 

  9    FRS  

467.5875 

Low

  10   

FRS 

467.6125 

Low 

  11   

FRS  

467.6375 

Low

  12   

FRS  

467.6625 

Low

  13   

FRS  

467.6875 

Low 

  14   

FRS  

467.7125 

Low

  15  

11  

GMRS  

462.5500 

High  

  16  

8  

GMRS  

462.5750 

High  

  17  

12  

GMRS  

462.6000 

High 

  18  

9  

GMRS  

462.6250 

High  

  19  

13  

GMRS  

462.6500 

High  

  20  

10  

GMRS  

462.6750 

High 

  21  

14  

GMRS  

462.7000 

High  

  22  

15  

GMRS  

462.7250 

High  

 General Specifications  

and Licensing 

Customer Assistance

Operation

Nothing 

Comes Close to a Cobra

®

LICENSING 

For Products Used in Canada

Industry Canada Notice 

Operation is subject to the following two conditions: 1) this device may 

not cause interference, and 2) this device must accept any interference, 

including interference that may cause undesired operation of the device.
«IC» before the equipment certification number signifies that the Industry 

Canada technical specifications were met. It does not guarantee that the 

certified product will operate to the user’s satisfaction.

For Products Used in the U.S.A.

FCC Licensing Required 

This two-way radio operates on GMRS (General Mobile Radio Service) 

frequencies which require an FCC (Federal Communications Commission) 

license. A user must be licensed prior to operating on channels 1 through 

7 or 15 through 22, which comprise the GMRS channels of this radio. 

Serious penalties could result for unlicensed use of GMRS channels; 

operation of this radio is subject to additional rules specified in 47 C.F.R. 

Part 95.
Licensed users will be issued a call sign by the FCC, which should be used 

for station identification when operating this radio. GMRS users should also 

cooperate by engaging in permissible transmissions only, avoiding channel 

interference with other GMRS users, and being prudent with the length of 

their transmission time.
For licensing information and application forms, please call the FCC 

Hotline at 800-418-FORM. Request form #159 and form #605. Questions 

regarding the license application should be directed to the FCC at 

888-CALL-FCC. Additional information is available on the FCC’s website at 

www.fcc.gov.

English

CXT345C_MANL_ENG.indd   14-15

2/19/13   11:24 AM

Summary of Contents for microTALK CXT345C












Reviews: