Privacy Code Scan
•
Your microTALK radio can automatically scan the
Privacy Codes
(either
CTCSS 01 through 38 or DCS 01 through 83) within one channel. Only
one set of privacy codes (CTCSS or DCS) can be scanned at a time.
To scan privacy codes:
1.
While in
Standby
mode, press and release the
Scan
button twice (CTCSS) or three times (DCS)
until the CTCSS or DCS icon and numbers are
flashing.
2.
Press and hold the
Scan
button to begin scanning
privacy codes within the selected channel.
Customer Assistance Warranty
Introduction
Operation
Mode Functions
Operation
14
15
Nothing
Comes Close to a Cobra
®
The
Scan
icon will continue to be displayed when privacy code scan
is
on
. Your radio will continue to scan privacy codes and stop as an
incoming transmission is detected. Your radio will remain on that
channel/privacy code for 10 seconds.
During scanning (while receiving an incoming transmission),
you can choose from the following:
a.
Press the
Mode/Power
button to enter the new setting and
proceed to other functions.
b.
Press
Talk
or
Call/Lock
button to enter the new setting and return
to
Standby
mode.
c.
Do not press any buttons for 15 seconds to enter the new setting and
return to
Standby
mode.
Select Channel
Scan Privacy Codes
HI / LO
SCAN
Scan Button
Channel Scan
•
Your microTALK
®
radio can automatically scan channels.
To scan channels:
1.
Press and release the
Scan
button until the
Scan
icon and the channel numbers appear
on the display.
2.
Press and hold the
Scan
button to begin scanning
channels.
The radio ignores specific privacy
codes while scanning channels.
The
Scan
icon will continue to be displayed when
scan is
on
. Your radio will continue to scan all
channels and stop if an incoming transmission is
detected. Your radio will remain on that channel for
10 seconds.
During scanning (while receiving an incoming transmission),
you can choose from the following:
a.
Press and hold the
Talk
button to communicate on that channel.
Your radio will remain on that channel and return to
Standby
mode.
b.
Press the
Channel
Up
or
Channel
Down
button to resume
scanning channels.
c.
Press and hold the
Scan
button to return to
Standby
.
Scan Channels
HI / LO
SCAN
Channel Button
HI / LO
SCAN
Scan Button
HI / LO
SCAN
Channel Button
