background image

VibrAlert

®

 and Call Alert 

Your microTALK

®

 radio can alert you to incoming 

signals by sounding an audible call tone, by 

vibrating silently or both. 

To change call settings:
1.

  Press the 

Mode

 button until the 

Call Setting

 

icon flashes on the display. The current setting 

(“01” v ring, “02” ring only) is displayed.

2. 

 Press  the 

Channel Up

 or 

Channel Down 

button to  

change the call setting.

3.   

Choose one of the following:

    

a.

  Press the 

Mode

 button to enter the new 

setting and proceed to other functions.

    

b.

   Press 

Talk

 or 

Call/Lock

 button to enter the 

new setting and return to 

Standby

 mode. 

 c.

  Do not press any buttons for 15 seconds to enter 

the new setting and return to 

Standby 

mode.

Customer Assistance Warranty

Introduction

Operation

Mode Functions

12

13

Operation

Mode Functions

Nothing 

Comes Close to a Cobra

®

Ten Call Tone Settings 

You can choose between ten different 

Call Tone Settings

 to transmit 

a call alert. 

To change a call tone setting:
1.

  Press the 

Mode/Power

 button until the  

letter “C” and the current call tone number  

(01 through 10) is displayed. The current  

call tone will sound for three seconds.

2.

  Press the 

Channel

 

Up

 or 

Channel

 

Down

 button 

to hear the other call tone settings.

3. 

 Choose one of the following:

    

a.

  Press the 

Mode/Power

 button to enter the 

new setting and proceed to other functions.

 b.

   Press 

Talk

 or 

Call/Lock

 button to enter the 

new setting and return to 

Standby

 mode. 

 c.

  Do not press any buttons for 15 seconds to enter 

the new setting and return to 

Standby 

mode.

Call Tone Setting

HI / LO

SCAN

Mode/Power

HI / LO

SCAN

Channel Button

Call Tone On/

Vibrate On

Call Tone On/

Vibrate Off

Roger Beep Confirmation Tone 

Your listener will hear an audible tone when you release the 

Talk

 button. 

This alerts the other party that you are finished talking and it is OK for 

them to speak.

To turn roger beep on or off:
1.

    Press  the 

Mode/Power

 button until the  

Roger Beep

 icon flashes. The current  

on

 or 

off

 setting is displayed.

2.

  Press the 

Channel

 

Up

 or 

Channel

 

Down

 button 

to select roger beep 

on

 or 

off

.

3. 

 Choose one of the following:

    

a.

  Press the 

Mode/Power

 button to enter the 

new setting and proceed to other functions.

 b.

    Press 

Talk

 or 

Call/Lock

 button to enter the 

new setting and return to 

Standby

 mode. 

 c.

  Do not press any buttons for 15 seconds to enter 

the new setting and return to 

Standby 

mode.

Channel Button

Roger Beep Off

HI / LO

SCAN

Mode/Power

HI / LO

SCAN

Channel Button

Key Tone On/Off 

When 

Key Tone

 is 

On

, an audible tone will sound each time a button 

is pressed.

To turn key tone on or off:
1.

   Current key tone status On/Off will flash.

2.

  Press the 

Channel

 

Up

 or 

Channel

 

Down

 button 

to select key tone on or off.

3. 

 Choose one of the following:

    

a.

  Press the 

Mode/Power

 button to enter the 

new setting and proceed to other functions.

 b.

   Press 

Talk

 or 

Call/Lock

 button to enter the 

new setting and return to 

Standby

 mode. 

 c.

  Do not press any buttons for 15 seconds to enter 

the new setting and return to 

Standby 

mode.

HI / LO

SCAN

Mode/Power

HI / LO

SCAN

Channel Button

Summary of Contents for CXT545














Reviews: