background image

18

General Specifications 

 

   FRS/GMRS  Frequency   

Allocation and Compatibility

Important: 

Please note that Cobra GMRS models with 15 Channels  

may designate different channel numbers for the same frequency.  
For example, a Cobra 15 Channel GMRS model would need to be  
tuned to Channel 11 in order to communicate with a 22 Channel  
GMRS tuned to Channel 15. Please refer to the chart below for  
channel/ frequency number compatibility. 

A =  Channel No. for 22 Channel FRS/GMRS Models

B =  Channel No. for 15 Channel GMRS Models

C = Type of Radio Service

D = Frequency in MHz

E = Power Output

 

A B  C 

E

 

1  

1  

FRS/GMRS  

462.5625 

High 

  2  

FRS/GMRS 

462.5875 

High

  3  

FRS/GMRS  

462.6125 

High  

  4  

4  

FRS/GMRS  

462.6375 

High  

  5  

5  

FRS/GMRS  

462.6625 

High  

  6  

6  

FRS/GMRS  

462.6875 

High   

  7  

7  

FRS/GMRS  

462.7125 

High 

  8  

 

FRS  

467.5625 

Low 

  9  

 

FRS  

467.5875 

Low

  10  

 

FRS 

467.6125 

Low 

  11  

 

FRS  

467.6375 

Low

  12  

 

FRS  

467.6625 

Low

  13  

 

FRS  

467.6875 

Low 

  14  

 

FRS  

467.7125 

Low

  15  

11  

GMRS  

462.5500 

High  

  16  

8  

GMRS  

462.5750 

High  

  17  

12  

GMRS  

462.6000 

High 

  18  

9  

GMRS  

462.6250 

High  

  19  

13  

GMRS  

462.6500 

High  

  20  

10  

GMRS  

462.6750 

High 

  21  

14  

GMRS  

462.7000 

High  

  22  

15  

GMRS  

462.7250 

High  

 General Specifications  

and Licensing 

Operation

Operation

Warranty

Introduction

19

Customer Assistance

Nothing 

Comes Close to a Cobra

®

IMPORTANT NOTICE: FCC LICENSE REQUIRED

 

This two-way radio operates on GMRS (General Mobile Radio Service) frequencies which require an FCC 

(Federal Communications Commission) license. A user must be licensed prior to operating on Channels 

1 through 7 on high power or 15 through 22, which comprise the GMRS channels of this radio. Serious 

penalties could result for unlicensed use of GMRS channels, in violation of FCC rules. Operation of this radio 

is subject to additional rules specified in 47 C.F.R. Part 95. 
Licensed users will be issued a call sign by the FCC, which should be used for station identification when 

operating this radio. GMRS users should also cooperate by engaging in permissible transmissions only, avoiding 

channel interference with other GMRS users, and being prudent with the length of their transmission time. 
For licensing information and application forms, please call the FCC Hotline at 800-418-FORM. Request form 

#159 and form #605. Questions regarding the license application should be directed to the FCC at 888-CALL-

FCC. Additional information is available on the FCC’s website at www.fcc.gov.
Channel 1 through 7 on low power and channels 8 through 14 comprise the FRS (Family Radio Service). 

No license is required to operate on the FRS.

WARNING

: Changes or modifications to this unit not expressly approved by the party responsible for 

compliance could void the user’s authority to operate the equipment.”

NOTE:

 This equipment has been tested and found to comply with the limits for a Class B digital device, 

pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection against 

harmful interference in a residential installation.  This equipment generates, uses and can radiate radio 

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful 

interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.  If this equipment does 

cause harmful interference to radio or television reception, which can be determined by turning the equipment off 

and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the  

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Safety Information for microTALK Radios

Your wireless handheld portable transceiver contains a low power transmitter. When the talk button is 

pushed, it sends out radio frequency (RF) signals. The device is authorized to operate at a duty factor not 

to exceed 50%. In August 1996, the Federal Communications Commissions (FCC) adopted RF exposure 

guidelines with safety levels for handheld wireless devices. 

Important

FCC RF Exposure Requirements: For body-worn operation, this radio has been tested and meets the FCC RF 

exposure guidelines when used with Cobra accessories supplied or designated for this product. Use of other 

accessories may not ensure compliance with FCC RF exposure guidelines. Use only the supplied antenna. 

Unauthorized antennas, modifications or attachments could damage the transmitter and may violate FCC regulations. 

Normal Position

Hold the transmitter approximately 2 inches from your face and speak in a normal voice, with the 

antenna pointed up and away.

MODEL CXT595:

This device complies with part 15 of the FCC Rules. Operation is subject to the following 

two conditions: 1) This device may not cause harmful interference, and 2) this device 

must accept any interference received,including interference that may cause undesired 

operation.
FCC Warnings: Replacement or substitution of transistors, regular diodes or other parts 

of a unique nature, with parts other than those recommended by Cobra may cause a 

violation of the technical regulations of part 95 of the FCC rules, or violation of type 

acceptance requirements of part 2 of the rules.

Summary of Contents for CXT545














Reviews: