background image

8   |   

P a g e

   

   

   

POWER   

Plug   one   end   of   the   supplied   12V   Vehicle   Power   Adapter   into   your   vehicle’s   cigarette   lighter,   

and   the   other   end   into   the   mini   USB   port   labeled   

DC   IN

   located   near   the   top   of   the   unit.   The   

unit   should   power   on   automatically.   If   it   does   not,   PRESS   AND   HOLD   the   

On/Off

   button   until   

the   display   activates.   When   power   is   applied   the   unit   will   automatically   start   recording.   

   

BASIC   

OPERATION

   

QUICK   START   

Press   the   

Record   

button   to   stop   and   start   recording.   

Press   the   

File   Lock

   button   to   lock   the   current   file   so   that   it   won’t   be   recorded   over.   

   

POWERING   ON   THE   DEVICE   

The   device   will   power   on   automatically   when   plugged   in   and   can   also   be   powered   by   PRESSING   

AND   HOLDING   the   

On/Off

   button   until   the   display   activates.

      

   

NAVIGATING   MENUS   

When   in   a   settings   menu,   press   

Up/Mute   

or

   Down/Exposure   

to   navigate   to   the   setting   you   

want   to   change   and   then   press   the   

Record/Select   

button   on   the   top   of   the   unit   to   change   the   

setting.      Pressing   the   

Menu/Back   

button   at   any   time   will   save   changes   and   exit   the   menu.   

   

THE   SD   MEMORY   CARD   

The   device   comes   with   a   pre-­‐installed   8   GB   micro   SD   memory   card.   To   remove   the   SD   card,   

press   firmly   on   the   SD   card   to   push   it   further   into   the   slot.      There   will   be   a   click   and   the   SD   card   

will   pop   out   on   release.      Extract   the   card   and   replace   as   necessary   by   inserting   a   card   into   the   

slot   and   pressing   until   it   locks   in   place.   

   

Note:

   This   device   supports   Class   IV   or   higher   micro   SD   cards   with   a   capacity   up   to   32GB.   

   

CHARGING   THE   DEVICE   

You   can   charge   the   device   with   the   included   car   charger   or   with   a   mini   USB   cable.   This   unit   is   

intended   to   be   powered   using   the   mini   USB   port   marked   

DC   IN

,   located   near   the   top   of   the   

unit.      There   is   another   mini   USB   port   on   the   side   of   the   unit   marked   

USB

,   which   is   intended   for   

connection   to   a   computer.         

Note:

   When   the   car   charger   is   connected   to   the   DC   IN   port,   the   device   will   automatically   power   

on   and   start   recording   video.      It   will   not   auto   record   when   power   is   connected   to   the   USB   port.   

The   battery   in   this   unit   is   intended   to   operate   the   unit   after   power   loss   due   to   an

 

accident   or   

crash.   Note   that,   while   recording   may   continue,   the   device   is   not   intended   for   long-­‐term   

recording   on   battery   power.   

Summary of Contents for CDR 825E

















Reviews: