Cobra CDR	825E User Manual Download Page 16

16   |   

P a g e

   

   

TROUBLESHOOTING   

   

If   your   unit   does   not   appear   to   be   operating   properly,   please   follow   these   troubleshooting   
steps:      

 

Make   sure   the   power   cord   is   properly   connected.      

 

Make   sure   the   socket   of   your   vehicle’s   cigarette   lighter   is   clean   and   free   of   corrosion.      

 

Make   sure   the   power   cord’s   cigarette   lighter   adapter   is   firmly   seated   in   your   cigarette   
lighter,   and   the   Status   LED   is   on.      

 

Check   the   power   cord   fuse.   (Unscrew   the   ribbed   end   cap   of   the   cigarette   lighter   adapter   
and   examine   the   fuse.   If   required,   replace   it   with   a   2-­‐amp   fuse   only.)      

For   detailed   and   up-­‐to-­‐date   FAQ’s,   please   visit   

www.cobra.com/support/faqs

.   

   

T

RADEMARK   ACKNOWLEDGEMENT

   

   

Cobra,   the   snake   design,   Drive   HD™,   the   d   design,   and   Record   your   ride™   are   proprietary   trademarks   of   Cobra   Electronics   Corporation,   USA.   
Other   trademarks   and   trade   names   are   those   of   their   respective   owners.      

Cobra   Electronics   Corporation™   is   a   trademark   of   Cobra   Electronics   Corporation,   USA.      
HDMI,   the   HDMI   logo,   and   High-­‐Definition   Mutilmedia   Interface   are   trademarks   or   HDMI   registered   trademarks   of   HDMI   licensing   LLC   in   the   
United   States   and   other   countries.      

   
NOTE:   This   device   complies   with   part   15   of   FCC   rules:   Operation   is   subject   to   the   following   two   conditions:   (1)   This   device   may   not   cause   
harmful   interference,   and   (2)   This   device   must   accept   any   interference   received   including   interference   that   may   cause   undesired   operation.      
   

CAUTION:   Modifications   or   parts   not   approved   by   Cobra   Electronics   Corporation   may   violate   FCC   Rules   and   void   authority   to   operate   this   
equipment.   This   device   complies   with   RSS-­‐310   of   Industry   Canada.   Operation   is   subject   to   the   condition   that   this   device   does   not   cause   harmful   
interference.      

   
CAN   ICES-­‐3B/NMB-­‐3B.      
   

DISPOSAL   OF   ELECTRONICS   EQUIPMENT:   This   product   may   contain   hazardous   substances   that   could   impact   health   and   the   environment   if   not   
disposed   of   properly.      
   

The   crossed   out   wheeled   bin   symbol   indicates   that   the   product   should   not   be   disposed   of   along   with   household   waste.   It   should   be   handed   
over   to   an   applicable   collection   point   for   the   recycling   of   electrical   equipment.   By   ensuring   that   this   product   is   disposed   of   correctly   you   will   
help/prevent   potential   negative   impact   on   the   environment.      
   

If   you   need   more   information   on   the   collection,   reuse   and   recycling   systems,   please   contact   your   local   civic   office   or   the   shop   where   it   was   
originally   purchased.      
   

WARNING:   This   product   contains   chemicals   know   to   the   State   of   California   to   cause   cancer   and   birth   defects   or   other   reproductive   harm.   
   
   

   
   

Summary of Contents for CDR 825E

















Reviews: