11 |
P a g e
G
-‐
Sensor
:
The Drive HD Dash Cam includes a built in G-‐Sensor which allows the device to determine when
the car has been in a collision. If it detects a collision, it automatically locks the recording being
made at the time of the accident. You can use this setting to set the sensitivity of the G-‐Sensor
from low to high or turn it off. The default G-‐Sensor value is medium. At High sensitivity the G-‐
Sensor may lock files due to smaller bumps like potholes and the SD card may fill up with
protected files.
Volume:
Allows you to raise and lower the volume of sound playback on the device.
Microphone:
Allows you to turn the microphone on or off. You can also do this via the up/microphone
button while video is being recorded. When the microphone is off, the camera will record video
only, and no sound.
Backlit keys:
Allows you to enable or disable the backlight of the keys on either side of the screen.
Screen flicker:
Optimizes video depending on how your country’s electrical systems work. Select 50Hz if the
power voltage of the country is 220V. Select 60Hz if the power voltage is 110V
Auto power off:
Automatically powers the unit off after a set time if the unit is NOT recording. This setting has
no effect while the unit is recording.
Screen Protector:
Allows you to set a duration after which the device’s display will go dark. This setting is useful
to avoid distracted driving and having a bright LED screen when driving at night. Select 1 minute
or 3 minutes.
TV Out:
Allows you to set the device to your regional television standard for proper output of the video
signal to your TV. The options are NTSC and PAL.
GPS:
Allows you to enable or disable GPS functions on the device. The GPS accessory for this product
is not currently available.
Timezone:
Allows you to adjust your device’s clock to the proper offset from GMT.
