5
Nothing
Comes Close to a Cobra
®
Getting Started
Installation
4
4
English
Installation
Installation
•
Installing the Hanger Bracket
1.
Install the hanger bracket on a vertical surface
near the bulkhead connector using the supplied
peel and stick adhesive*. The optional stainless steel
screws can also be used.
*Be sure to clean the mounting surface with isopropyl
alcohol prior to mounting unit with peel and stick adhesive.
Installation
Hanger Bracket
Getting Started
•
Refer to the foldout at the front of this manual to identify the various controls and
indicators on your
Bluetooth
handset.
Most button functions are activated by a momentary press, then release. In those
cases that call for “press and hold,” hold the button down for at least two seconds
after it is pressed. The
PTT
button is held down as long as you are speaking into
the microphone.
When using the handset, tones will sound to:
■
Indicate an error – three beeps.
■
Confirm an action – two beeps.
■
Confirm a single button press (except the
PTT
button) – one beep.
You can turn the
Key Tones
Off if you want (see page 21).
Try It Out
Using the
Bluetooth
handset is the most effective way to learn about it. Don’t
hesitate to explore functions and add entries to see how they work. Do not be
concerned if you make mistakes. They can all be undone in
Edit
mode. Or you
can reset the unit to the original factory default condition. Push and hold the
Green Phone
and
Home
function keys, then push the
Power
key until the
unit turns On.
NOTICE
Resetting the unit will clear ALL
Bluetooth
device pairings as well as the
Call Log, Phonebook and
Bluetooth
device list.
BT200_MANL.qxp:10732 Cobra MR F300 BT 12/8/08 1:44 PM Page 4
