Introduction
17
Nothing
Comes Close to a Cobra
®
English
Introduction
16
Operating Your Handset
Customizing the BT 200
NOTE
If corrections are needed before saving the entry, press the
Left
or
Right
Arrow Function
button to move the cursor to the character that is to be
changed and press the
Delete Function
button to remove that character.
Then scroll the list to select the correct character.
NOTE
A “double click” on the
Delete Function
button will remove the entire entry
and return the cursor to the initial position after
Name
.
To Edit an Existing Name or Phone Number:
1.
Select
Phonebook
from the
Menu
function, scroll down to
name or number to be edited and press the
Edit Function
button to arrive at the screen shown.
2.
Use the
Right
and
Left Arrow Function
buttons to move
the cursor to the character(s) to be changed and proceed
as described for making corrections when entering a new
name or number.
3.
Press the
Save Function
button to save the changes or
deletion and go back to the
Phonebook
function.
PA Output
If, during installation, you have connected the Cobra
Bluetooth
handset connection
cable to your vessel’s stereo AUX input, you can allow the handset
to be used as a public address microphone.
To Enable Use of Auxiliary Speakers:
1.
Select
PA Output
from the
Menu
function to arrive at
the screen shown.
2.
Press the
On
or
Off Function
button to toggle between
On and Off condition.
NOTE
An optional installation cable is necessary to use the PA feature.
Phonebook Entries
The Operation section described using a
Phonebook
entry to dial an outgoing call.
Both names and numbers can be stored in the
Phonebook
.
To Enter a New Name and Phone Number
1.
Select
Phonebook
from the
Menu
function and scroll
the pointer down to
Add New
at the bottom of the list
to arrive at the screen shown.
2.
Press the
Enter
or
New Function
button to advance
to the
Phonebook Edit
mode.
3.
Press the
Up
or
Down Arrow
button to scroll the
alphanumeric list to the first character of the
Name
.
NOTE
The list consists of the letters A to Z followed by the
numbers 0 to 9 followed by +, “space,” *, and # and
it will wrap around from # to A.
NOTE
If only a number (without a name) is to be entered,
at step 3, press the
Right Arrow Function
button until
the cursor moves to the first character of the number
and jump to step 7.
4.
When the first character appears above the cursor, press
the
Enter
or
PTT
button to save the character and move
the blinking cursor to the right.
5.
Repeat step 4 until the entire name has been entered.
6.
Continually press or press and hold the
Right Arrow
Function
button until the cursor moves to the first
character of the Number.
7.
Enter the phone number in the same fashion as the name.
8.
Press the
Save Function
button to save the entry and go
back to the
Phonebook
function.
Operating Your Handset
Customizing the BT 200
NAME :
NMB:
SAVE
DEL
Enter a New Name
and Phone Number
+1 555 588 2300
JANE DOE
ADD NEW
EXIT
EDIT
49
50
NEW
Add New
ON
OFF
PA OFF
Enable Use of
Auxiliary Speakers
NAME : BILL ANDERSON
NUMBER: +1 555 566 1234
SAVE
DEL
Phonebook Edit
BT200_MANL.qxp:10732 Cobra MR F300 BT 12/8/08 1:44 PM Page 16
