![background image](http://html.mh-extra.com/html/cobra/76-xtr-street-communicator/76-xtr-street-communicator_user-manual_2631069008.webp)
Installation
PA Speaker Installation
Mount PA speaker in desired location.
Plug jack into the back of the Connector Box
labeled PA.
*The PA speaker should have 4-8 ohms impedance
and be able to handle at least 4 watts.
Public Address:
An external PA speaker may be
connected to the PA speaker jack when used as a public
address system. The speaker should be directed away
from the microphone to prevent acoustic feed-back.
Physical separation or isolation of the microphone and
speaker must be employed when operating the PA at high
output levels.
Ignition Noise Interference
The alternator and ignition system in your vehicle may
limit your ability to receive low signal levels. Other noise
interference can be the result of several different
installation variables. Consult your Cobra dealer or a 2-way
radio technician to help locate and correct the source of
severe noise interference.
PA Speaker
Installation
10
11
Operation
Turning On
Rotate the power ON-OFF
Volume Control clockwise.
When using the radio in CB mode:
Set the CB/PA Switch to CB.
Turn the Squelch Control counterclockwise until
noise is heard.
Adjust volume to a
comfortable level.
When using the radio in PA mode:
Set the CB/PA Switch to CB.
Adjust volume to a comfortable level.
Turning Your
CB On
Ignition Noise
Interference
76 XTR MANUAL.qxd 4/17/03 4:58 PM Page 10