background image

27

Optional Accessories

Optional
Accessories 

You can find accessories at your
local Cobra® dealer, or in the
U.S.A. you can order 
directly from Cobra®.

Ordering From U.S.A.

Call 773-889-3087 for pricing or
visit www.cobra.com.

For credit card orders

Complete and mail this order
form to:
Cobra® Electronics 
Attn: Accessories Department 
6500 West Cortland Street
Chicago, IL 60707 USA.

Or fax the completed form to us
at 773-622-2269.

You may also order by phone by
calling 773-889-3087 (press 1
from the main menu) 8:00 a.m.
to 6:00 p.m. CT, Monday through
Friday.

To order online 

please visit our website:
www.cobra.com

Remote Connector Box 

AC-701

4 Foot Extension Cord

AC-702

Replacement 
Microphone Bracket

For in vehicle use

741-080-9-001

Dynamic External Speaker

HG S100

Noise Canceling 
External Speaker

HG S300

Noise Canceling With Talk
Back External Speaker

HG S500

Warning
Customer Assistance

Thank you for purchasing the Cobra 76 XTR Radio.
Properly used, this Cobra product will give you many years
of reliable service.

Warning

Warning: This product is intended for off road use. Please
check the laws and regulations in your state, county
and/or municipality regarding installation and use of this
product.

The manufacturer makes no claims as to the edequacy of
use and assumes no liability for any improper use or
installation. Installation and use are solely the
responsibility of the purchaser.

Customer Assistance

In this user’s manual, you should
find all the information you
need to operate your radio. If
you require further assistance
after reading this manual,
Cobra® Electronics offers the
following customer assistance
services:

For Assistance In the
U.S.A.

Automated Help Desk

English only. 24 hours a day,
7 days a week 773-889-3087
(phone).

Customer Assistance
Operators

English and Spanish. 8:00 a.m.
to 6:00 p.m. CT, Monday through
Friday (except holidays) 
773-889-3087 (phone).

Questions

English and Spanish. Faxes can
be received at 773-622-2269
(fax).

Technical Assistance

English only. www.cobra.com
(on-line:Frequently Asked
Questions). English and Spanish.
[email protected] (e-
mail).

For Assistance Outside 
the U.S.A.

Contact Your Local Dealer

Controls and Indicators

1

CB/PA Switch

2

Dual Watch Button

3

LCD Display Panel

4

Speaker

5

Microphone

6

On/Off/Volume Control

7

Squelch Control

8

Channel Up

9

Channel Down

10

PTT (Push-To-Talk) Key

11

Quick Disconnect 
Connector

A2

A3

3

7

5

8

6

4

10

11

9

1

2

76 XTR MANUAL.qxd  4/17/03  4:58 PM  Page 4

Summary of Contents for 76 XTR Street Communicator


















Reviews: