![background image](http://html.mh-extra.com/html/cobra/76-xtr-street-communicator/76-xtr-street-communicator_user-manual_2631069006.webp)
7
Installation
Installing Microphone Hanger
Hold microphone hanger in location desired for
mounting. Make certain that nothing will interfere
with the hanger’s installation.
Mark the location for the two mounting screws
(screws included).
Drill and mount microphone hanger.
Installing
Microphone
Hanger
Installation
In-Dash Quick Disconnect Installation
Remove rubber grommet from metal mounting
plate (1).
Carefully drill hole in dash or flat area same size as
hole on plate. Be sure there is adequate clearance
behind the panel before drilling.
Install the metal mounting plate on any flat surface
with the two screws provided.
Insert junction box mic connector through the hole in
the metal plate (2).
Slip rubber grommet over the black connector cable,
then press the grommet into the metal mounting
plate hole (2&3).
Slide mic connector into rubber grommet.
In-Dash Quick
Disconnect
Installation
6
76 XTR MANUAL.qxd 4/17/03 4:58 PM Page 6