![background image](http://html.mh-extra.com/html/cobra/19-ultra-ii/19-ultra-ii_how-to-use-manual_2631053014.webp)
Operation (Cont.)
C. Rear Panel
1.
ANTENNA CONNECTOR:
This SO-239 connector permits connec-
tion of the transmission line cable male connector to the transceiver.
2.
PUBLIC ADDRESS:
An external 8-ohm 4.0 watt PA speaker may be
connected to the PA Speaker Jack when this unit is used as a public
address system. The speaker should be directed away from the micro-
phone to prevent acoustic feed-back. Physical separation or isolation of
the microphone and speaker must be employed when operating the PA
at high output levels.
3.
EXTERNAL SPEAKER:
The External Speaker Jack is used for
remote receiver monitoring. The external speaker should have 8-
ohm impedance and be rated to handle at least 4.0 watts. When the
external speaker is plugged in, the internal speaker is automatically
disconnected.
4.
POWER:
These wires supply power to the CB radio. See page 5 for
installation.
10
1
2
3
4
19.ULTRA.MANUAL.qx 9/15/97 4:09 PM Page 14