![background image](http://html.mh-extra.com/html/cobra/19-ultra-ii/19-ultra-ii_how-to-use-manual_2631053013.webp)
9
5.
CB/PA Switch
. Selects mode of operation. In the CB position, the PA
function is disabled and the unit will transmit and receive on the select-
ed channel. The PA function should not be used unless a PA speaker is
connected.
6.
S-RF/Power Meter
. Shows relative transmitter RF output power
and input signal strength when receiving. The five LED (Light
Emitting Diode) segments glow to indicate receive or transmit
activity.
7.
TX Indicator LED
. This indicator will light red when in the trans-
mit mode.
8.
LED Channel Display
. The selected operating channel will be dis-
played here.
9.
Channel Selector Switch
. When turned, this knob is used to select
any one of the forty citizens band channels desired.
For a ÒRAPIDÓ change of channels, depress and hold the desired
button (up and down). This allows all 40 channels to be covered in
about 6 seconds.
Other Operation Features
•
Automatic Noise Limiter
. This is a non-switchable feature that
is always on to reduce background noise.
Operation (Cont.)
19.ULTRA.MANUAL.qx 9/15/97 4:09 PM Page 13