Copyright © 2016 Cobra Systems, Inc. All rights reserved
3
PRINTER MUST BE TURNED OFF!
1. Open printer lid by pressing the green tabs on each
side located toward the front of the printer.
2. Slide ink roll onto spindle and set in rear hub. Insert
second spindle into empty cardboard core and set in
front hub. Pass ink ribbon under the ink roll carriage
and print head. Attach ink ribbon to the empty core
and take up any slack before closing cover.
3. Slide new media onto mount.
4. Feed media, face up, under the white Teflon bar
through the cutter slot. Adjust the green media
guides to fit the width of the vinyl.
5. With the printer powered off, plug the keyboard and
power cord into the rear of the printer.
6. Plug the power cord into a properly grounded AC
outlet.
VnM®4 SignMaker Quickstart
NOTE: Always have the VnM printer cover closed when powering on.
