Copyright © 2016 Cobra Systems, Inc. All rights reserved
ENTER QUANTITY TO PRINT:
1
5. Enter the quantity to print and press ENTER.
REPEAT TEMPLATE:
Press ENTER
3. Select the REPEAT TEMPLATE and press ENTER.
ENTER TEXT:
;
PIPE SIZE (inch dia.)
1
4. Enter the symbol/character and press ENTER.
5. Enter diameter of your pipe and press ENTER.
c) Repeat Template
ENTER QUANTITY TO PRINT:
1
6. Enter the quantity to print and press ENTER.
PIPE MARKING TEMPLATES
Press ENTER
16
NITROGEN
a) 2 x 12 inches
FIRE SPRINKLER WATER
b) 1 x 7 inches
DOMESTIC CHILLED WATER;
d) 3 x 24 inches
€ € € € € €
c) 2 inch Repeat Template, 4 inch diameter
1. Select PIPE MARKING TEMPLATES by
pressing the ENTER key.
2. Select any PIPE MARKING TEMPLATE
option by pressing the UP and DOWN
arrow keys.
The Pipe Marking template meets ANSI/ASMI letter height standards and tape lengths,
allowing you to create custom pipe markers.
Below is a 2 x 12 pipe marker example identifying the contents of the pipe as NITROGEN (a).
IF YOU ARE NOT SURE WHICH
TEMPLATE TO USE, REFER
TO THE VNM PIPE MARKING
GUIDE ON PAGE 22.
VnM4 Tips
VnM®4 Keypad Templates: Pipe Marking
1INCH - MARKING TEMPLATE
1 X 7 INCHES (1 LINE)
3INCH - MARKING TEMPLATE
3 X 24 INCHES (1 LINE)
2INCH - MARKING TEMPLATE
2 X 12 INCHES (1 LINE)
4INCH - MARKING TEMPLATE
4 X 24 INCHES (1 LINE)
2INCH - MARKING TEMPLATE
2 X 14 INCHES (1 LINE)
4INCH - MARKING TEMPLATE
4 X 32 INCHES (1 LINE)
2INCH - MARKING TEMPLATE
2 X 12 INCHES (1 LINE)
3. Select any PIPE MARKING TEMPLATE option
and press ENTER.
ENTER TEXT:
NITROGEN
4. Enter the text/symbols for the pipe marker
and press ENTER.
NOTE: To add an arrow to your text (as displayed
on sample ”C”), use the ; (semicolon) character.
Use PIPE MARKER font on page 19 for reference.
a) Pipe Marking Templates
