COBHAM EXPLORER 8100 Ku, Hardware Installation Manual

Page: 14 / 22

To modify the Antenna
10 Chapter 1: Conversion to Ku-band 98-155944-A
5. While supporting the BUC, remove the supporting screws at the front of the BUC and fit
the two gaskets between bracket/BUC and Waveguide/bracket.
6. Mount the 4 screws and tighten them to torque 2.5 Nm.
7. Tighten the 4 screws for the BUC brackets to torque 10 Nm.
Figure 18: Waveguide, gaskets
Figure 19: Waveguide, mount screws
Figure 20: Tighten screws for BUC brackets