To modify the Antenna
12
Chapter 1: Conversion to Ku-band
98-155944-A
3. Adjust the SMA connector so that the cable exits to the right (after tightening) when the
OMT and LNB are in upright position. Tighten the connector to torque 1.7 Nm.
4. Protect the connection with splicing tape.
5. Attach the 2 cables for OMT and LNB to each other with a cable strip at the LNB
connector.
Figure 24: SMA connector on LNB
Figure 25: Seal connector at LNB
Figure 26: Cable strip at LNB
Summary of Contents for EXPLORER 8100 Ku
Page 1: ...EXPLORER 8100 Ku Conversion Kit Hardware installation guide...
Page 2: ......
Page 21: ......
