Setup using the web interface
98-143492-B
Chapter 4: Setup and operation
4-15
Set
up
a
n
d
op
e
ra
tio
n
4.1.9
To import and export a system configuration
If you need to reuse a configuration in another EXPLORER 5075GX, you can save the
current configuration to a file, which can then be loaded into another EXPLORER 5075GX.
You can also use this feature for backup purposes.
Important
Load and save configurations can only be done with the same software
version in the units involved.
The configuration file contains all the settings you have entered during system setup:
satellite profiles, VSAT modem profiles, LAN setup, user permissions etc.
To save a configuration to a file, do as follows:
1. Select
ADMINISTRATION > Export/import config
.
Figure 4-13: Web interface: Administration, Export/import configuration
2. Click the button
Export
. Follow the download instructions on the screen. You can use
this configuration file for upload into another EXPLORER 5075GX,
To load a configuration from a file, do as follows:
1. Select
ADMINISTRATION > Export/import config
.
2. Click the button
Browse
and locate the configuration file (.cfg file) you want to upload.
Then click the button
Open
.
3. In the web interface click the button
Upload
.
To clone a system configuration, do as follows:
1. Reset to factory default, see the following section for details.
2. Import a configuration from file, see section above.
