Setup using the web interface
98-143492-B
Chapter 4: Setup and operation
4-7
Set
up
a
n
d
op
e
ra
tio
n
Figure 4-5: Web interface: SETTINGS, Network (default settings)
Important
Make sure that the networks do not use IP address ranges that overlap.
Make the necessary changes on this page and click
Apply
.
Sections
Preferred use
NETWORK Host
name
The host name is used for identifying the EXPLORER 5075GX. The
default host name is acu. You can change the name. Letters (a-z), digits
(0-9) and hyphen (-) are allowed as legal characters.
Note: The host name must start with a letter.
LAN Port 1
LAN port 1 is dedicated as the service port. By default this port has the IP
address http://192.168.1.2; the current value can be displayed in the
EXPLORER 5075GX display.
The service port has 3 modes:
•
Static
(default).
•
DHCP client
. Used when the antenna is on a local network.
•
Switched with port 5
. Used to access the GX modem. This LAN is
internal with static IP configuration (192.168.1.2).
Table 4-3: Setup of LAN network
