Setup using the web interface
4-
14
Chapter 4: Setup and operation
98-143492-B
4.1.8
To set up user permissions (guest login)
You can manage user access to certain functions of the EXPLORER 5075GX system. You can
allow or deny users that are not administrators (user name: guest, password: guest) access
to certain functions and make these pages read-only. This is useful if you want to protect
the system against unintended changes or tampering of the system.
Important
Study this screen thoroughly and decide which areas of the EXPLORER
5075GX system you want to give non-administrator users (user name:
guest) access to.
To set up the user permissions for guest users, do as follows:
1. From the left navigation pane, select
ADMINISTRATION > User permissions
.
Figure 4-12: Web interface: ADMINISTRATION, User permissions
2. For each item under
ALLOW USERS TO:
select
•
Yes
to allow the
guest user
access
•
No
to block the
guest user
access to the settings. Then the pages are read-only,
changes cannot be made by the guest user.
Change network
: Change IP configuration of the LAN connectors. For further
information see
To configure the LAN network
on page 4-6.
Operate antenna
: Allow to deploy, stow, stop or jog the antenna using the web
interface.
Control Modem
: Allow to reset or power cycle the GX modem.
3. Click
Apply
.
The settings to which access is denied are now greyed out for the guest user.
