COBHAM AVIATOR 200, User Manual

Page: 42 / 126

Chapter 3: Operation
32 AVIATOR Wireless Handset functions
For information on how to make calls using a SwiftBroadband unit, see
Making a call using a SwiftBroadband unit on page 38.
To receive a call
When the handset is ringing, the display
shows the calling name or number, if
known.
Answer the call by pressing the off hook
key in the left side of the keypad
, or
by removing the handset from the cradle.
For information on cradle detection, see
To set up the function of the cradle on
page 63.
Any open menus are closed down when the handset is ringing.
You can see unanswered calls under
Call log
in the AVIATOR Wireless
Handset menus or in the web server.
To transfer a call
When you receive a call, you can transfer it to another phone connected to
the terminal. The most commonly used scenario is that you make a blind
transfer. This means that you transfer the call directly to a new number,
without talking to the new number before putting the call through.
Note If the handset is in the cradle
while you answer the call, the
mode will automatically be hands-
free (by default).