COBHAM AVIATOR 200, User Manual

Page: 48 / 126

Chapter 3: Operation
38 AVIATOR Wireless Handset functions
To end or reject a call
Press the on hook key to end an ongoing call or to reject an incoming
call.
When the handset is in hand-held mode, you can also end the call by
placing the handset in the cradle.
Making a call using a SwiftBroadband unit
When making a call with the AVIATOR Wireless Handset using a
SwiftBroadband unit you use the SwiftBroadband network and its
functionality.
To make a call from a handset connected to a SwiftBroadband
unit
To make a call from a phone or handset connected to a SwiftBroadband
unit, dial
00 <country code> <phone number>
followed by or
#
.
Example:
To call Thrane & Thrane in Denmark (+45 39558800),
dial
00 45 39558800
followed by or
#
.
To make a call to a handset connected to a SwiftBroadband unit
To make a call to a handset connected to the SwiftBroadband unit, dial
Note The default call type is set up in the web interface of the
SwiftBroadband unit. However, you can select the call type for
your call, using a prefix.
Dial
1 *
before the number to make a Standard Voice call.
Dial
2 *
before the number to make a 3.1 kHz Audio call.
Example:
Dial
2 * 004539558800
to make a 3.1 kHz Audio
call to Thrane & Thrane in Denmark.
Note By default all handsets connected to the terminal will ring on
incoming calls.