Introduction to the built-in web interface
6-6
Chapter 6: Configuration
98-166784-A
Ethernet Interface Statistics
To access ACU configuration and status, click on the
Antenna
tab.
First time login as administrator
For a new installation you must set the ACU into local administration and set the admin
password. This is also the case after a factory default. Do as follows:
1. On the ACU keypad, push and hold the left arrow key for 5 seconds.
2. Wait for the very short display of
Local administration
, followed by the event text:
0807F-0 WARNING Local administration enabled.
This will give you temporary administrator access
for 1 hour or until next restart
.
3. Open your browser and access the web interface.
4. Enter user name:
admin
(no password is required).
The
DASHBOARD
is displayed.
5. To create or change the password select
ADMINISTRATION > User login
and locate
the section
Change Login
.
6. Type in the new password (minimum 8 characters) and click
Change
. No old password
is required.
After 1 hour or a restart the new administrator password is required.
If you cannot establish a connection there might be problems with the Proxy server
settings of your PC. See
Proxy server settings in your browser
on page 8-5 for further
information.
The web interface shows the antenna
DASHBOARD
page.
Item
Description
Transmitted Packets Displays the number of transmitted IP packets.
Received Packets
Displays the number of received IP packets.
Transmitted Bytes
Displays the number of bytes transmitted to the modem.
Received Bytes
Displays the number of bytes received by the modem.
Table 6-4: Items in the section Ethernet Interface Statistics
Note
Accessing the ACU with the local administration function
does not change the current administrator password.
