![COBHAM 407006D-00500 Installation And Operation Manual Download Page 12](http://html1.mh-extra.com/html/cobham/407006d-00500/407006d-00500_installation-and-operation-manual_2629886012.webp)
Typography
1-2
Chapter 1: About this manual
98-166784-A
Manuals issued by Cobham SATCOM are periodically revised and updated. Anyone relying on this
information should acquire the most current version e.g. from
,
Cobham
SYNC Partner Portal
.
1.4
Typography
In this manual, typography is used as indicated below:
Bold
is used for the following purposes:
• To emphasize words.
Example: “Do
not
touch the antenna”.
• To indicate what the user should select in the user interface.
Example: “Select
SETTINGS
>
LAN
”.
Italic
is used to emphasize the paragraph title in cross-references.
Example: “For further information, see
To connect cables
on page...”.
1.5
Precautions
Text marked with “Warning”, “Caution”, “Note” or “Important” show the following type of
data:
•
Warning
: A Warning is an operation or maintenance procedure that, if not obeyed, can
cause injury or death.
•
Caution
: A Caution is an operation or maintenance procedure that, if not obeyed, can
cause damage to the equipment.
•
Note
: A Note gives information to help the reader.
•
Important
: A text marked Important gives information that is important to the user,
e.g. to make the system work properly. This text does not concern damage on
equipment or personal safety.
All personnel who operate equipment or do maintenance as specified in this manual must
know and follow the safety precautions. The warnings and cautions that follow apply to all
parts of this manual.
WARNING!
Before using any material, refer to the manufacturers’ material
safety data sheets for safety information. Some materials can be dangerous.
CAUTION!
Do not use materials that are not equivalent to materials
specified by Thrane & Thrane A/S. Materials that are not equivalent can cause
damage to the equipment.
CAUTION!
The system contains items that are electrostatic discharge
sensitive. Use approved industry precautions to keep the risk of damage to a
minimum when you touch, remove or insert parts or assemblies.