
3
BBG-1034-AUD-PRO-DSP Function Menu List and Descriptions
3-16
BBG-1034-AUD-PRO-DSP PRODUCT MANUAL
BBG-1034-AUDPRO-OM (V1.6)
(continued)
Routing the DSP Audio Outputs On the Device
Again, depending on whether the DSP is positioned at the device input or output mixer, Audio DSP processed outputs are
available as follows:
•
DSP positioned at the Input Mixer makes its outputs available to the device Audio Bus Channels (as choices on each
Audio Bus Ch 1 thru Audio Bus Ch 16 drop-down using the Input Audio Routing tab).
•
DSP positioned at the Output Mixer makes its outputs available to the device Embedded, AES, and Analog Audio
channels (as choices on each device output drop-downs using the Output Audio Routing tab).
Note: Dolby encoded audio can only be outputted on digital audio channels such as embedded or AES. However, DSP audio
processed to provide PCM outputs can also be outputted on analog audio output channels. These outputs will be processed
just like any other PCM handled by the device, and converted to analog by the device on-board audio DAC.
In the example here, since DSP A was set up to be positioned at the input mixer, its DSP outputs are routed to the Audio Bus
channels as shown below.
Table 3-1
BBG-1034-AUD-PRO-DSP Function Menu List — continued
DSP A Upmix > RTLL 5.1 > 6 PCM Audio DSP A L thru
Audio DSP A Rs routed to input Audio Bus Channels
Ch1 thru Ch 6, respectively.
The DSP outputs can be used for other internal routing
or processes, or be available as PCM outputs from the
device via the Audio Bus.
DSP A Upmix > RTLL 5.1 > 6 PCM + 2 Dolby Digital Encoded
Outputs Audio DSP A Dolby L and Audio DSP A Dolby R
routed to input Audio Bus Channels Ch 7 and Ch 8,
respectively.
The DSP outputs can be used for other internal routing or
processes, or be available as outputs from the device via the
Audio Bus.
Upmix
Emb 1/2
(PCM)
Route 5.1 PCM to Audio Bus
Channels 1-6
5.1 RTLL
Dolby 5.1
Digital Encode
Route 5.1 Dolby D pair to
Audio Bus Channels 7/8
Like any other signals routed to the Audio Bus, these
outputs are available on any of the embedded audio or
AES outputs.
Summary of Contents for BBG-1034-AUD-PRO-DSP
Page 26: ...1 22 BBG 1034 AUD PRO DSP PRODUCT MANUAL BBG 1034 AUDPRO OM V1 6 This page intentionally blank...
Page 32: ...2 6 BBG 1034 AUD PRO DSP PRODUCT MANUAL BBG 1034 AUDPRO OM V1 6 This page intentionally blank...
Page 116: ...3 84 BBG 1034 AUD PRO DSP PRODUCT MANUAL BBG 1034 AUDPRO OM V1 6 This page intentionally blank...
Page 117: ......