Cobalt Digital Inc BBG-1034-AUD-PRO-DSP, Product Manual, Page: 28 / 118

2
Rear Panel Connections
2-2
BBG-1034-AUD-PRO-DSP PRODUCT MANUAL BBG-1034-AUDPRO-OM (V1.6)
Figure 2-1 Mounting BBG-1034-AUD-PRO-DSP Using Frame Mounting Tray
BBG-1034-AUD-PRO-DSP Unit Dimensions
Figure 2-2 shows the BBG-1034-AUD-PRO-DSP physical dimensions and
mounting details for cases where BBG-1034-AUD-PRO-DSP will be
installed in a location not using the optional
BBG-1000-TRAY mounting tray.
Rear Panel Connections
Perform rear panel cable connections as shown in Figure 2-3.
Note: • The BBG-1034-AUD-PRO-DSP BNC inputs are internally 75-ohm termi-
nated. It is not necessary to terminate unused BNC video inputs or outputs.
• External frame sync reference signal (if used) must be terminated if a
looping (daisy-chain) connection is not used. Unterminated reference
connection may result in unstable reference operation.
1
From front of tray, slide unit into tray, aligning with
tray edge and/or guides
2
Slide unit (rear) fully to rear of tray. Secure unit to
tray using captive fastener. Tighten only finger tight.
Note: BBG-1034 will not align with tray captive
fastener if rubber feet are affixed to
bottom of BBG-1034.
Remove rubber feet if BBG-1034 is
being installed in tray.