background image

We Wish You Safe and Happy Boating! 

Your Cobalt boat was built to meet or exceed all applicable boat building standards at the time of 
manufacture. Your Cobalt boat was inspected and certified prior to introduction, and periodic inspections of 
this model are conducted in-plant to ensure continued compliance. Cobalt is affiliated with the following 
organizations for your safety and pleasure.

The American Boat and Yacht Council, Inc. (ABYC) is an independent organization dedicated to developing 
and maintaining the highest level of marine equipment safety standards for U.S. boat manufacturers. 
Working closely with the U.S. Coast Guard (USCG) and other authorities, the ABYC reviews marine 
equipment and systems, including electrical systems, ventilation, steering, flotation, load capacity, fuel 
system and others that may have an impact on your safety.

The National Marine Manufacturers Association (NMMA) is an independent organization involved in a wide 
range of activities aimed toward the promotion and improvement of all aspects of boating. Members include 
manufacturers of boats, engines and marine equipment of all types.

One division of the NMMA provides an inspection and certification program to members. Inspections are 
performed to the rigid and detailed standards of the USCG and ABYC. Certification requires compliance with 
all applicable standards and recommendations.

Inside_FrontRear_Cover.fm  Page 0  Wednesday, March 1, 2006  6:02 AM

Summary of Contents for 323 Day Cruiser

















































































































































Reviews: