Cobalt Digital Inc 323 Day Cruiser, Owner'S Manual

Page: 115 / 144

Cobalt_OM_preprint_shell.fm Page 1 Wednesday, March 1, 2006 5:39 AM
323 Owner’s Manual 4
-
11
S
YSTEMS
BATTERY CONNECTIONS
Loose battery connections can cause errant signals
to the boat’s electrical system.
Read and understand the safety information on or
supplied with your battery(ies). Maintain the
battery(ies) following the manufacturer’s
recommendations.
JUMP START STUDS
This receptacle allows for jump-starting an engine.
The receptacles have protective covers and must
stay in place when receptacles are not being used.
The covers identify the + positive (red) and the -
negative (black). The studs can be used to raise the
engine compartment when the batteries are low or
removed.
The jump start studs are located near or on the
battery switch panel.
1 – Receptacle
A
WARNING
Avoid the potential of explosion from
shorting or arching. Keep the battery
connections tight and clean, the
terminal covers in place and the
battery(ies) secure in the restraint
system.
COB_0090_A
NOTICE: Do not start an engine
from the jump start studs
without the batteries connected
to the boat’s charging system.
Damage to engine and charging
system will result.
1
2
ALL
OFF
HELM
BILGE PUMP
UM
COB_0100_A
1