www.
coaxlan.de
CLM253
User Manual
V001
Master Unit
CLM253
55 of 61
Once you enter the parameters of the new type, you have to click the Submit button to
create the new type. This new type will be shown in the Slave Type Management list. The
Reset button set the default values to all the parameters. The Return button comes back
to the Slave Type Management page.
2.7.4.
IP Access Control
The SYSTEM→ IP Access Control menu shows the page displayed in Picture. This page
allows to create a list of IP addresses to access the
CLM253
master unit. There are two
panes:
IP Access Control
: where the user can enable or disable this access control
clicking the related radio button. The change is applied when the Commit button
is clicked. The Refresh button update the information shown here.
The List Of IP Address To Allowable Access
: it is the list of IP addresses from which
the access to the master unit is allowed when the IP access control is enabled. To
add a new set of IP addresses, the user must click the New button which will show
the New Certification Rules page displayed in Picture. The user can add one
address or a set of addresses with the corresponding subnet mask; the new set of
addresses will be saved when the Commit button will be clicked. The Back button
is used to come back to the IP Access Control page. The Reset button sets the
default values for all the parameters shown in the New Certification Rules page.
Picture
49
