coaxLAN CLM253 User Manual Download Page 40

Page: 40 / 61

V001

CLM253

User Manual

40 of 61

Master Unit

CLM253

This page has several panes which are described in the following table:

Item

Description

Pane 1: Default Template

Default Template

If you select Enable option to upload the default
template configuration automatically to any
new registered slave. If you select Disable
option,

template

will

uploaded

automatically to any new registered slave.

Submit

If this button is clicked, the option selected in this
pane is activated.

Refresh

If this button is clicked, the data on this pane
are updated.

Pane 2: Template management

Template Index

A number which identifies uniquely a template.

Template Name

A name which identifies uniquely a template.

Template Class

The class of the template. Possible values for this
parameter are:

SW: Only Ethernet ports

WiFi: Only WiFi interface.

SW+WiFi: Ethernet ports and WiFi interface
available.

Operation

Two buttons are available:

Modify:  Open  a  new  page  to  modify  the
template.  See  Picture.  Check  the  Template
Configuration  pane  of  table    Table  for  more
information  about  all  the  items  displayed  in  the
template modification page.

Delete: Delete the selected template.

Table

Picture

Summary of Contents for CLM253






























































Search results

Summary of Contents for CLM253

Reviews:

Related manuals for CLM253

Brands by name

Popular brands

coaxLAN CLM253, User Manual

Search results

Summary of Contents for CLM253

Reviews:

Related manuals for CLM253

Brands by name

Popular brands