coaxLAN CLM253 User Manual Download Page 37

Page: 37 / 61

www.

coaxlan.de

CLM253

User Manual

V001

Master Unit

CLM253

37 of 61



Cli User Setting

: it allows to create and modify users and superusers.

This feature is

under development so it is recommended not to use it

. To create and modify users

and superusers you should use the own slave web management interface of the
slave.



Web User Setting

: it allows to modify the default superuser (with administrator

permissions). You should click the Apply the button to apply the changes.



Saving Setting

: after any change, you should click the Saving Setting button to

store changes in the slave flash memory.



Factory Setting

: the Reset Factory Setting allows to recover the factory settings of

the slave.



Reboot System

: click the Reboot button to reboot the WiFi interface.

2.3.1.11.

WiFi Upgrade

This page allows to configure a FTP server to download a file for upgrading. The Picture
shows this page.

Picture

Summary of Contents for CLM253






























































Search results

Summary of Contents for CLM253

Reviews:

Related manuals for CLM253

Brands by name

Popular brands

coaxLAN CLM253, User Manual

Search results

Summary of Contents for CLM253

Reviews:

Related manuals for CLM253

Brands by name

Popular brands