www.
coaxlan.de
CLM253
User Manual
V001
Master Unit
CLM253
25 of 61
Item
Description
Pane: WifiBase
WiFi enable
It is a check box which allows to enable or
disable the WiFi interface of the slave unit. If the
check box is disabled, the AP<n> setting panes
are hidden. When the WiFi is enabled, any
wireless device connected to the slave can
transmit or receive from slave.
Country
It is the country where the slave is installed. The
combo box shows the list of available countries.
Note: it might be illegal to operate the slave in a
region other than the countries listed.
Emissive Power
It is the level of power emitted by the slave WiFi
interface. The check box shows the available
levels of emission. The following table explain
the meaning of these levels:
Level
Power
Level1
20%
Level2
40%
Level3
60%
Level4
80%
Level5
100%
MultiAp
It is an option to set the number of access points
available from the WiFi interface of the slave.
The related combo box shows the available
values of this option. The value set fixes the
number AP<n> settings panes shown in this
page. The Picture shown and example with 2
access points.
Pane: AP<n> Settings
SSID
It is the Service Set Identifier (SSID) of the access
point. It is a 32 alphanumeric unique identifier
which is used to identify uniquely the access
point and it is also known as the wireless network
name. This field is case-sensitive. If you use a
wireless computer to change the wireless
network name (SSID) or the security options,
you will be disconnected when you click Apply.
To avoid this problem, use a computer with a
wired connection to access the slave.
Channel
It is the wireless channel used by the slave WiFi
interface. The related check box shows the
