Airfusion Abyss Installation Instructions
8 |
P a g e
This fan is suitable for indoor, alfresco and
coastal areas. This product is IP66 rated
and can be exposed to powerful water jets
from any direction. This rating should be
maintained during installation.
HANGING OF THE FAN (Fig.6)
1. Place the hanger onto the mounting bracket. Ensure the key slot of the hanger ball is positioned on the
key pin of the mounting bracket to prevent the fan from rotating when in operation; (Fig.6.1)
2. Install the drive component onto the hanger by pushing through the mounting bracket; (Fig.6.2)
3. Connect the wiring (Fig.6.3 &
Refer to the wiring diagram in Fig.7 for more information
)
-
Connect the supply cable from the terminal block to the input of the drive component.
-
Connect the output of the drive component to the cable of the fan assembly.
-
Connect the earth wire to the earth terminal.
-
Ensure the earth terminal is tightened to maintain the earth continuity.
4. Check and ensure all wiring connections are secured. (Fig.6.4)
Fig. 6
Fig. 6.1
Fig. 6.2
Fig. 6.3
Fig. 6.4
