OWNER’S MANUAL
PURFIKT SPA
2021
23
SPA STATUS
Important information about spa operation can be seen on the
Main Screen. Most features, including Set Temperature
adjustment, can be accessed from this screen. The actual water
temperature can be seen, and the Set Temperature can be
adjusted (see page 5). Time-of-Day, Ozone and Filter status is
available, along with other messages and alerts. The selected
Temperature Range is indicated in the upper left corner. The Spa
Equipment Control Icon will spin
if any pump is running. A Lock
icon is visible if the panel or settings are locked.
Note: After 30 minutes* the display will automatically go into
sleep mode, which turns the display off. This is normal
operation. Touch anywhere on the screen to wake the panel
up.
PURFIKT SPA
C
ONTROL PANEL
The Main Screen
Lights
Time
Filter Cycle 1 Running
Wi-Fi Signal Indicator
Lock
Invert Screen
High Temperature Range
Heat
Settings
Temperature Scale (F/C)
Jets
Set Temperature
Clean-up Cycle
Ozone Running
R = Ready Mode | RR = Ready/Rest Mode
= Rest Mode
Invert (or flip) Screen
F1 = Filter Cycle 1 is running
F2 = Filter Cycle 2 is running
F+ = Filter Cycles 1 & 2 are both running
O3 = Ozone is running. If you don’t see the icon that
means the Ozone is OFF.
C = Clean-up cycle is running.
Note: Not all systems that can run a Cleanup Cycle
display this icon.
Wi-Fi icon just indicates that the Wi-Fi
link is connected.
H = High Temperature Range
L = Low Temperature Range
R
