OWNER’S MANUAL
2021
29
H _ (Heater Type)
Displays a heater type ID number.
SW _ (Dip Switch Settings)
Displays a number that represents the DIP switch positions of S1
on the main circuit board.
PANL (Panel Version)
Displays a number of the software in the topside control panel.
GFCI (GFCI Test)
(Feature not available on CE rated systems.)
GFCI Test is not always enabled, so it may not appear. This
screen allows the GFCI to be tested manually from the panel and
can be used to reset the automatic test feature. If the GFCI Test
Feature is reset, the device will trip within 7 days.
A/B (A/B Sensor Temperatures)
When this is set to On, the temperature display will alternate to
display temperature from Sensor A and Sensor B in the heater.
FALT LOG (Fault Log)
The Fault Log is a record of the last 24 faults that can be
reviewed by a service tech.
DEMO (Demo Mode)
Demo Mode is not always enabled, so it may not appear. This is
designed to operate several devices in a sequence in order to
demonstrate the various features of a particular Curve Spa.
CURVE
COLLECTION