eVenue Thunder
19
H a r d w a r e O p e r a t i o n
Audio Out
When the Thunder Master and Thunder Remote are used separately to send audio output to ePods, use the Output to ePods
connections on each device’s I/O connection panel.
Using Thunder Master and Thunder Remote Together
When the Thunder Remote is used together with the Thunder Master, all audio input devices should be connected to the Remote.
(See Figure 29 on the following page.)
Note:
An exception to this rule can occur when an audio input is needed at the Thunder Master (e.g., a microphone
input for a halftime awards presentation on the field). When this is needed, the input is controlled from the
Thunder Master per usual operations.
When the Thunder Master and Thunder Remote are used together, ePods should only be connected to the Thunder Master. Use of the
Thunder Remote’s output connection is not recommended unless the Thunder Remote is used alone with ePods.
In this configuration, the Master Volume knob controls system outputs. The two Master Volumes become clones of each other, while
the Thunder Remote’s Remote Volume knob controls no outputs (unless there are ePods plugged directly into the Thunder Remote,
though this is not recommended.)
Follow the procedures in the Connections and Controls section of this manual to operate both products’ various volume and mixer
controls.
Figure 28: I/O Connection Panel Output to ePods Connection
