eVenue Thunder
10
S e t u p a n d T e a r d o w n P r o c e d u r e s
4. Connect all audio cables according to your system’s configuration. Secure each ePod cable end with the provided
carabiner. Unspool and connect to the Thunder Master (or Thunder Remote).
5. After all the connections are made, test the multiple audio inputs and outputs through the Thunder Master and ePods by
checking signal clarity, and making sure no equipment damage will occur. If needed, adjust sound coverage by changing
the ePod Upper Speaker Array placement with the Commando-e Remote. For further specifications about this process, see
the Sound Coverage Overview section on page 25 or the Commando-e Remote Operations section on page 23 of this
manual.
Figure 11: Connect audio cables for all components.
