WELDIING GAS ANALYZER
CM-650
5/21/2021
7 |
P a g e
May 21, 2021
U:\Documentation\Projects\CM-650\References\Manual
REV C
Installation Procedure
This device features four mounting feet to allow for easy installations for an array of
applications. ***Mounting hardware not included***
1. Mount the device securely in desired location. Pay close attention to the orientation of the
device.
FRONT
2. Connect the Power and Signal cable tot the appropriate ports.
3. Hard wire the device following this wiring diagram:
1- Black- System Ground
2- White – Not Used
3- Red – 24v In
4- Green/Yellow – Not Used
BOTTOM
UPRIGHT
Figure 5-1
Figure 5-2
Figure 5-3
Figure 5-1
