WELDIING GAS ANALYZER
CM-650
5/21/2021
13 |
P a g e
May 21, 2021
U:\Documentation\Projects\CM-650\References\Manual
REV C
To ensure maximum benefit from this product, please observe the follow guidelines.
1. Repair - Do Not attempt to repair or modify the device in any way. Please contact CO2Meter directly if
the product needs servicing, including replacement or calibration service. See Section 15 for technical
support contact information.
2. Cleaning - Disconnect the power before cleaning. Use a damp cloth. Do not use liquid cleaning agents
such as benzene, thinner or aerosols, as these will damage the device. Do Not splash the unit with
water. 3. Maintenance – We recommend
Support & Warranty
Contact us: We are here to help!
If the troubleshooting guide above does not help you solving your problem or for more
information, please contact us using the information below.
(386) 256-4910 (M-F 9:00am–5:00pm EST)
See CO2Meter, Inc. Terms & Conditions at:
www.CO2Meter.com/pages/terms-conditions
131 Business Center Drive
Ormond Beach, FL 32174
Phone: 386-872-7665 | Fax: 866-422-2356
Email: [email protected]
Product Care
