14
ENGL
IS
H
Setting the air conditioner to
start
in 2 hours and
stop
after 5 hours
1. Press [ TIMER ON ]. The remote control will display “Timer On”, the latest TIMER ON setting and the “h” (hour) symbol.
2. Press [ TIMER ON ] the required number of times until “2.0h” is displayed on the remote control.
3. Press [ TIMER OFF ].
4. Press [ TIMER OFF ] the required number of times until “5.0h” is displayed on the remote control.
5. The air conditioner is now programmed to start in 2 hours and stop after 5 hours.
SLEEP – gradual lowering of the temperature at night
Note:
The sleep feature can only be activated with the air conditioner on and only if the “Cool” mode is selected.
1. Press [ SLEEP ]. The set temperature will be reduced by 1 °C during the first 30 minutes.
2. After another 30 minutes the temperature will be reduced by a further 1 °C.
3. Thereafter the air conditioner will continue to keep reduce the temperature for the next 7 hours and then return to
the original set temperature.
Air outlet
The air flow from the front air outlet can to a certain degree be directed by
moving the louvres by hand.
Care and maintenance
• Turn off and unplug the air conditioner from the wall socket before cleaning or servicing it.
• Clean the air conditioner using a lightly moistened cloth. Use only mild cleaning agents, never solvents or corrosive
chemicals. Never spray the air conditioner with water.
• You can turn the air conditioner on again directly after it has been turned off but it takes 3 minutes for the compressor to
restart and the cooling and dehumidifying functions to work. Only the fan will restart directly.
Cleaning the filter
The air filter should be cleaned every 14 days.
1. Turn off the air conditioner and pull out the plug from the wall socket.
2. Remove the filter holder over the air inlet (5).
3. Vacuum the filter and wipe it clean with a damp cloth. Clean the air
intake where the filter sits too.
4. Allow the filter to completely dry before refitting it.
If the air conditioner is not to be used for a long time
1. Unscrew the cover over the drain hole (4), pull the rubber plug out of the drain hole and connect the included drain hose (11).
Move the air conditioner close to a suitable drain and unscrew the cover over the lower drain hole (8). Make sure that all
water runs out.
2. Turn on the fan (FAN mode) in order to dry the internal parts of the air conditioner and hinder mould growth.
Let the fan run for about 6 hours.
3. Turn off the air conditioner and unplug it from the wall socket.
4. Remove the batteries from the remote control.
5. Clean the air filter and refit it.
6. Remove the hose from the upper drain outlet.
7. Screw the covers over the drain holes back on.