10
ENGL
IS
H
Control panel
18. [ MODE ] Select function:
Air conditioner (Cool), fan (Fan)
or dehumidifier (Dry).
19. [ - ] Temperature setting
20. Mode indicator
21. Display
22. [ + ] Temperature setting
23. [
] Power switch
18
19
20
21
22
23
24
25
26
27
29
28
30
31
32
Remote control
24. [ ON/OFF ] On/off switch.
25. [ MODE ] Select function: (Auto, refer to
The remote control
section),
Air conditioner (Cool), fan (Fan) or dehumidifier (Dry).
26. [ FAN ] Fan speed setting low/high.
27. [ SLEEP ] Gradual lowering of room temperature, for example before going to bed.
28. [ SHORT CUT ] Go back to current or previous setting.
29. [
▲
TEMP
▼
] Temperature setting
30. [ TIMER ON ] Setting for when the timer is to switch the air conditioner on.
31. [ TIMER OFF ] Setting for when the timer is to switch the air conditioner off.
32. [ LED ] Switch the LED display on/off
33
34 35
36
37
38
39
40
41
Remote control display
33. Displayed functions
34. Shown when the remote control transmits a signal.
35. Shown when the air conditioner is switched on.
36. Shown when the Timer On mode is activated.
37. Shown when the Timer Off mode is activated.
38. Shown when the remote control batteries need changing.
39. Shown when the sleep mode is activated.
40. Shows the chosen fan speed.
41. Shows the chosen temperature or timer setting. In fan mode
nothing is shown on the display.
Inserting batteries into the remote control
1. Remove the battery cover on the back of the remote control by sliding it in the direction of the arrow.
2. Insert 2 × AAA/LR03 batteries (included). Note the polarity markings in the battery compartment to ensure correct insertion.
3. Slide the battery cover back into place.
Note:
• Changing batteries erases any programmed settings the remote might have previously had.
• Never mix old and new batteries. Never mix rechargeable and non-rechargeable batteries.
• Remove the batteries from the remote control if it is not to be used for a long time.