9
Weekly Checks
Quarterly Checks
Annual Checks
1. Clean grease and dirt off the helical racks. Apply gear
grease on all helical racks.
2. Check the dust collection pipe and brush hood. Clean off
all debris and dust build up.
3. Generally inspect the router for any damage or loose/
worn parts.
4. Empty oil tray under the liner carts.
Conduct a drill block grease check.
Schedule an on-site service with a CNC Factory technician.
Connectivity
The Raptor has USB, WiFi and ethernet connections. It only requires the internet for virtual/remote access.
Configurations for your router’s connectivity will already be set-up by your technician during installation.
Oil trays
Summary of Contents for RAPTOR XPR
Page 1: ...U S E R G U I D E...
