"AUTO start" button, the machine automatically start bending processing. Repeat the
above process, can be produced in large quantities. once finished, press the "pump"
button, the oil pump motor to stop, this time can turn off the power switch.
In "3R shape processing" interface, you can set the find the reference speed and
bending speed.
七.
Maintenance
In order to keep the arc bending machine working continuously, reliably reduce the
damage of the parts, and extend the service life, the maintenance system of the arc
bending machine must be implemented.
1. Daily maintenance: once every shift.
1.1 Check the tightening bolts and nuts everywhere.
1.2 Check the connection of various agencies. If there is any abnormality, it should be
cleared. Lubricates horizontal slide rails and retractable universal joints.
1.3 Check the electrical system: After turning on the power, check the rotation
direction and operation of the motor.
1.4 Keep the arc bender tidy and clean the dirt inside the arc bender frequently.
1.5 The hydraulic oil (46 # wear-resistant) in the hydraulic station is replaced every
six months.
2, technical maintenance: check the mould to ensure that the mould is intact without
damage.