C shape automatic processing steps: In "C shape processing" interface, press
the "PUMP" button, hydraulic station start,loosen the nut, the workpiece is placed
into the machine, press "AUTO start" button, the middle roller moves to the rolling
start point, then tighten the nut(no need very tight, suitable is ok), Again press to the
"AUTO start" button, the machine automatically start bending processing. Repeat the
above process, can be produced in large quantities. once finished, press the "pump"
button, the oil pump motor to stop, this time can turn off the power switch.
In "C shape processing" interface, you can set the find the reference speed and
bending speed.(1
～
15r/min)
9.U-shaped processing
In the "Main Interface", press the "U-shaped formula" key, and the system enters the
"U-shaped formula" interface:
In the "U-shaped recipe" interface, press the "+" or "-" key to call the corresponding
recipe. U-shaped processing can store 100 profile formula. In each formula, enter the
profile name, arc radius, Wheel radius, starting cylinder position, and other
parameters. Press the "save formula" key, and the formula is automatically stored in
the "U-shaped processing" interface. Press the "back" key to return to the "Main
Interface" screen, and then press the "process" key , The screen changes to the
