EVAC-500 Voice Alarm & Evacuation System Operation Manual
36
/
42
（
1
）
“Paging -01 group -01
：
1) “Paging-01” Indicates that the currently listed group information is a microphone at address 01.
2) “group-01” It's group 01, but it can also be 02 or 03. The range is: 01 ~ 12.
（
2
）
“host 01
：
01
，
02
，
04
，
05
，
06
；
host 02
：
01
，
02
，
03
，
05
，
06”
：
Indicates that some partitions contain the
host (the system defaults to - host 01, and the user cannot change).
Except the partition 3 all partitions and extension of the host 01 all partitions except the partition 4 (extended host
number from 02, the user can not change), that is, the user in the address of 01 if you use a microphone on grouping
mode, the elected group 01 paging is equivalent to choose the host and at the same time extend the host 01 each five
partitions paging.
Note
：
①
After the modification is completed, please click "Application", otherwise your Settings will not be able to
complete your expected function on the corresponding device;
②
Please refer to the above described above "when configured with the evac-500sft configuration as shown
below".
6.3.5. Fire Alarm Rules Configuration
1.
Set fire alarm rules
;
Set contact output partition and connect relay status
;
“Fire mode”
：
Above pic.
：
①
users can choose from a way:
