CMi 401 118, Original Instructions Manual

Page: 48 / 152

48
If you can’t fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.
Disposal
Disposal of the appliance
This appliance must not be disposed of with regular
household waste! Dispose of the appliance in the
appropriate manner. For more information, consult
your community waste disposal service.
Disposing of fuels and lubricants
Waste fuels, waste oils, and materials containing oils
(air filter, rags, etc.) may not get into the environment.
– Bring waste materials that could damage the
environment to a collection point of the dealer or
in your community.
Disposal of the packaging
The packaging consists of cardboard and
correspondingly marked plastics that can
be recycled.
– Make these materials available for recycling.
Technical data
Spark plug is soiled (is the tip black-
ened with soot)?
Clean the spark plug.
Is the distance between the elec-
trodes of the spark plug too large?
Set the gap to 0.6 to 0.7 mm.
Wrong fuel or mixture? Drain the tank and fill with the cor-
rect mixture.
Incorrect carburettor setting? Have the carburettor adjusted.
Motor will not stop. Spark plug: Is the electrode light
grey and does it show signs of com-
bustion?
Insert a spark plug with higher tem-
perature resistance.
Motor runs too quickly. Motor is too cold? Let the motor warm up slowly; if
necessary, set the choke lever
slightly higher.
Filament is too short?
►
Extending the filament – p. 45
Excessive formation of exhaust gas/
smoke
Wrong fuel mix? Fill with stipulated fuel.
Carburettor mixture set incorrectly Have the carburettor adjusted.
Trimming performance insufficient. Blade blunt? Turn (only possible with suitable
knives) or replace the knife.
Have the knife sharpened by an au-
thorised workshop.
Filament does not feed out auto-
matically.
Filament used up?
►
Replacing the filament – p. 46.
Filament spool blocked? Eliminate the cause of the blockage
(
►
Removing the filament spool –
p. 46).
Trimming tool is rotating during
idling even though the throttle has
not been operated.
Idling speed too high? Have the carburettor adjusted.
Throttle stop engaged? Briefly press the throttle firmly to re-
lease the throttle stop.
Fault/malfunction Cause Remedy
WARNING! Risk of fire or environmental
damage!
Avoid damage caused by leaking
fuel: drain the tank prior to disposal.
Item number 401 118, 401 119
Motor stroke volume 25 cm³
Maximum motor output 0,75 kW
Idling speed 3000 min
−1
Max. motor speed 10000 min
−1
Tank volume 500 ml
Fuel consumption 455 g/kWh
Max. rotational speed for cut-
ting
• Impact knife
• Filament spool
8000 min
−1
7500 min
−1
External diameter of knife 230 mm
Diameter of knife mount 25,4 mm
Diameter of cutting area when
operating with a filament
400 mm
Filament diameter 2,5 mm
Required filament length 4 m
GB
Motorsense_401118_401119.book Seite 48 Donnerstag, 7. April 2016 2:28 14