EN
14
Appendix A – Shoulder (Clavicle) Use
1 . Remove liner pad . (Figure 2)
2 . Remove Velcro tab “A” and loosen strap .
(Figure 1)
3 . Feed strap through slot until it is free,
leaving the strap attached only on
the side of the unit with the cord .
4 . Attach long strap to the open slot .
5 . Replace liner pad . (Figure 2)
6 . Center treatment coil over fracture
site as prescribed by your physician .
(Figure 3)
7 . Longer strap should fall down the
back, and the shorter strap and
cord should fall down the front .
(Figure 4)
8 . Bring the longer strap around the front
of the torso, and attach to the
short strap making sure the unit is se-
cured over the fracture site .
(Figure 4)
Figure 1
Figure 2
Figure 3
Figure 4
OL1000 SC1 Application Instructions
