CME WIDI-X8 User Manual Download Page 17

 

original channel, the WIDI-X8 will automatically establish communication. The green 

indicator will be on to show a successful communication establishing.   

z

 Automatic communication establishing during frequency setting mode changes   

When the frequency setting mode changes from automatic to manual, the WIDI-X8 will 

automatically establish communication; when the frequency setting mode changes from 

manual to automatic, the WIDI-X8 will automatically search for available radio channel 

and establish communication. The green indicator will be on to show a successful 

communication establishing.   

 

4.2  Automatic notes off 

In either one of the following cases, the system will automatically send the “All Notes 

Off” MIDI message to stop the sound from the tone generator.   

z

  Bad signal with data loss.   

z

  During the communicator the sender is switched off.   

z

  Radio channel changed   

z

  The frequency setting mode changed.   

z

  When using the one-to-multi function to switch the communication.   

 

4.3 On-line detection  

 

After switched ON the WIDI system will automatically detect the on-line status. The 

green indicator will show the communication status.   

 

5 Notes 

z

  To use the WIDI-X8 with you computer via the USB connection, please make sure the 

WIDI-X8 is properly connected to the computer and switched on before you launch you 

music software.   

z

  Close your music software before you stop or uninstall the WIDI-X8 from the USB 

connection.  

z

  It is recommended that you stop or uninstall the USB device before you unplug the USB 

 17

Summary of Contents for WIDI-X8





















Reviews: